Extreme Eagle
Built 2006–2007. Serial numbers start with C.P.A. Not your bow? Pick another
The Falcon is the same bow with a different riser design, so they take the same parts. The Switchblade shares their chart.
Which size?
Pick yours by draw length, or match the paint on your cable ends below.
Label worn off?
Look at the ends of your cables, near the loops. Oneida painted them to mark the size. Pick the row that matches.
| Size | Power cable ends | Yoke cable ends |
|---|---|---|
Brown one end, White the other |
Green one end, Brown the other |
|
Brown one end, White the other |
Purple one end, White the other |
|
Blue both ends |
Yellow one end, Brown the other |
|
Blue both ends |
Brown both ends |
Pick your size to see the string length and cable colors
Each size has its own string length. Oneida also painted the cable ends to mark the size, and where two sizes share colors we point it out.
This string length is from Oneida's papers.
Oneida's 2006 Extreme Eagle spec sheet lists 43 3/8″ for this size. If you have your old string, measure it.
Strings, cables and parts for the Extreme Eagle
Strings and cables are built to your size, so pick your size above first. Everything else can go straight in the cart.
How-to guides for the Extreme Eagle
- Change draw length: Black Eagle and newer Oneidas
- Change draw weight and set tiller: Black Eagle and C.P. Oneidas
- Find your size: Black Eagle and newer Oneidas
- Install G-String draw stops
- Lube and care: Black Eagle, C.P., Kestrel, Phoenix and Osprey
- Mount a rest, reel seat or line puller
- Replace the power and yoke cables: Black Eagle and C.P. Oneidas
- Replace the cam bearings: Black Eagle and newer Oneidas
- Replace a hinge: Black Eagle and newer Oneidas
- Replace limb pockets, limb bolts and washers: Black Eagle and newer Oneidas
- Replace the saddles on your outboard limbs
- Replace the string: Black Eagle and C.P. Oneidas
- Replace the timing wheels or idlers: Black Eagle and newer Oneidas